TM 10-6640-238-13 4-183 4-75.    HOT PLATE, WATER BATH, GREASE WORKING MACHINE AND BRACKETS. This task consists of: a. Remove b. Install INITIAL SET-UP Tools Required General Mechanics Tool Kit, (Appendix B, Section III, Item 1) Portable Electric Drill, (Appendix B, Section III, Item 2) Twist Drill Set, (Appendix B, Section III, Item 2) Hand Blind Riveter, (Appendix B, Section III, Item 3) Materials/Parts Required Rivets, (23) REMOVE 1. Remove Hot Plate and Brackets.  See Figure 4-71. a. Open cabinet U to gain access to hardware. b. Loosen strap (1) securing power cord (2). c. Loosen captive screw (3) and remove bracket (4) and hot plate (5). d. Remove two rivets (6) and bracket (7). e. Remove four rivets (8) and strap (1). f. Remove two rivets (9) and bracket (10). g. Remove two rivets (11) and bracket (12). h. Remove five rivets (13) and bracket (14). 2.    Remove Water Bath and Brackets. a. Open cabinet U to gain access to hardware. b. Loosen captive screw (15), remove bracket (16) and water bath (17). c. Remove two rivets (18) and bracket (19). d. Remove two rivets (20) and bracket (21). e. Remove two rivets (22) and bracket (23). f. Remove two rivets (24) and bracket (25). 3.    Remove Grease Working Machine and Bracket. a. Open cabinet U to gain access to hardware. b. Loosen captive screw (26), remove bracket (27) and grease working machine (28). c. Remove four screws (29) and bracket (30).