TM 10-6640-238-13
4-145
4-60. DRYING RACK.
This task consists of:
a.
Remove
b.
Install
INITIAL SET-UP
Tools Required
General Mechanics Tool Kit, (Appendix B, Section III, Item 1)
Materials/Parts Required
Lockwashers, (2)
REMOVE
Remove Drying Rack. See Figure 4-56.
a.
Remove two screws (1), lockwashers (2), washers (3) and drying rack (4) from curbside wall. Discard lockwashers.
INSTALL
Install Drying Rack. See Figure 4-56.
a.
Install drying rack (4) onto curbside wall and secure with two screws (1), lockwashers (2), and washers (3).
|
|