TM 10-6640-233-10
Table 3-1. Troubleshooting (cont.)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
18. WASTE WATER HEATER FAILS TO HEAT WASTE WATER.
Check and reset circuit breaker No. 3 located in Power Panel No. 2.
If heater still fails to produce hot water, notify unit maintenance.
19. FUME HOOD EXHAUST BLOWER(S) FAILS TO OPERATE.
Step 1. Check operation of blower switch (MS starter).
If inoperable, notify unit maintenance.
Step 2. Check and reset circuit breaker No. 10 located in Main Power Panel.
If exhaust blower(s) still does not operate, notify unit maintenance.
20. DRYING OVEN FAILS TO OPERATE (DOES NOT HEAT).
Check and reset circuit breaker No. 17 located in Main Power Panel.
If oven still fails to operate, notify unit maintenance.
21. REFRIGERATOR FAILS TO OPERATE.
Step 1. Ensure power cord is plugged into convenience outlet.
Step 2. Check position of temperature control knob.
Turn temperature control knob clockwise to maximum cold setting.
Step 3. Check and reset circuit breaker No. 6 located in Power Panel No. 2.
If refrigerator still fails to operate, notify unit maintenance.
3-6
|
|
