TM 10-5411-232-13&P CARGO BED COVER (CBC) M105A2 TRAILER, TYPE II 0016 00 FOLDING STEP   THIS WORK PACKAGE COVERS: Remove, Replace INITIAL SETUP: Maintenance Level Materials/Parts Unit Screws 5/16-18, 1.25 lg; Tools and Special Tools Washers, Lock No. 12; Combo Wrench, 1/2” Flat Washers No. 12; Nuts Wrench, 1/2” Socket 5/16-18; Folding Step P/N 104055; Sealing Compound P/N 700145 GENERAL This procedure contains information and instructions to keep CBC folding step assemblies in good working order by removing and replacing damaged parts. REMOVAL 1.    Using socket wrench (see WP 0021 00, Table 0021 00-2, Item 1), remove two bolts, nuts and washers (1), one set from top part of step and one set from bottom part of step, which hold the folding step to the CBC shell.  Hold bolts from the outside with combo wrench to remove folding step. REPLACE 1.    Apply sealer P/N 700145 to the area to be covered with the step.  Replace folding step with bolts, nuts and washers (1).  Tighten securely. END OF TASK 0016 00-1/(2 Blank)