TM    10-4930-251-12&P SEE    PROC     5 1 REF I RE  F REF SEEPROC 9 TANK    SKID 2 (MALE     END) 7 14 11 SEE    PROC     7 1 1 Figure   4-3 Preparation    for  Tank   Installation. (c)     Orient   and  position    inboard  and  outboard   clamping    adapters,  ( 12 and  13), and attach  to  post  protruding   from   one  skid  on  tank  (2),  using  two   screws  ( 19), and two   washers  (20). Install   hardware   only   finger   tight.   enough   to  retain  adapters   during   positioning    of  tank.   Repeat procedure   at post  on the  other  side.  Note   that  positions    will   be reversed   (inverted)    to  maintain    the inboard   position    of  adapter     13).  See Figure   4-3  and  Figure   4-4. 2 2 1     (FLATSED) 11 17 0 TANK    SKID (MALE   END) GOO, 19 20 13 8 9 9 21 Figure   4-4     Angle/Bracket/Clamping, Adapter   Assembly. 4-9