TM 10-3930-665-13&P
3-9 REPLACING TAKE-UP ROLLERS
Removal:
a. Remove setscrews from the outer take-up blocks (2 places).
b. Remove attaching bolts from take-up blocks.
c. Loosen adjusting nuts (4 places).
d. Remove take-up blocks.
e. Remove shaft and roller assembly.
f. Remove shaft with drift tool while supporting roller.
Replacement:
a. Replace shaft in new take-up roller.
b. Replace shaft and roller assembly.
c. Replace take-up blocks and replace bolts.
d. Adjust take-up roller assembly.
e. Replace setscrews in the outer take-up blocks (2 places).
3-7
|
