| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-381-14-1
2-2. LOADING AND UNLOADING ABLE PAYLOAD WITH MINE CLEARING BLADE ATTACHED (CONT)
(g) On curbside of semitrailer, route long chain (24) from towing shackle in lifting eye along outer payload
hull, between hull and track, and then under mine clearing blade mounting frame (32) approximately
midway between pin (33) that attaches mounting frame (32) to payload and pin (34) that attaches
push beam to mounting frame (32).
(h) Remove as much slack as possible between mounting frame (32) and towing shackle in streetside
center tiedown ring so long chain (24) will stay in position.
(i) Position mine clearing blade dog-bone (35) at angle near long chain (24) attached to streetside load
binder (17) and under chain (24) being attached to curbside load binder (17).
NOTE
When attaching load binders to tiedown chains, take up as much slack as possible
so the remaining slack can be taken up when load binders are operated.
(j) Take up as much slack as possible and attach long chain (24) to curbside load binder (17).
(k) Operate curbside load binder (17) to tighten long chain (24) until dog-bone (35) is held firm. Ensure
that two tightened chains (24) do not contact each other.
2-28
|
||
|
||
