| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-337-14
INSTALLATION (continued)
WARNING
Use caution when lifting the supplemental armor. A swinging or shifting
load may cause injury to personnel.
91. Using dawg grips (Table 7-2), a suitable lifting sling, and lifting device, raise and position rear shield (36)
against vehicle fender, as shown.
92. Align two holes in rear shield (36) with threaded holes of filter mid- plate (35) and install with two flat
washers (6), lockwashers (7), and hexagon head capscrews (8). Clamp rear shield (36) in place on
vehicle , right front (30), and right rear (33) brackets.
NOTE
Rear shield brackets 12500840- 1 and 12500840-2 are match fit. Select the
bracket which is appropriate for the vehicle. When installing shiel bracket
d
12500840-2, replace hexagon head capscrew B1821BH038C100N with
B1821BH038C150N.
93. Install rear shield bracket (37) or (38) on rear shield (36) with two flat washers (6), lockwashers (7), and
hexagon head capscrews (8).
4-34
|
||
|
||
