| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-337-14
INSTALLATION (continued)
67. Install center support bracket assembly (1) on frame plate (34) with four flat washers (6), two
hexagon head capscrews (8), lockwashers (7), and self-locking nuts (5). Torque self-locking nuts to
55-65 lb-ft (75- 81 Nm).
68. Using a 19/32- inch drill bit and slider support bracket (3) as a template, drill two holes through the
center cross brace (4) and right rear support bracket (2).
69. Install four flat washers (6), two hexagon head capscrews (17), lockwashers (7), and self-locking nuts
(5) on slider support bracket (3), center cross brace (4), and right rear support bracket (2).
4-26
|
||
|
||
