Custom Search
 
  
 


TB 9-2330-337-14
INSTALLATION (continued)
59. Using a 19/32- inch drill bit and frame plate (34) as a template, drill nine holes, marked K, through engine
and pump frame, as shown.
60. Using a 19/32- inch drill bit and frame plate (34) as a template, drill two holes, marked J, through hose
trough, as shown.
61. Remove all burrs and sharp edges. Finish all exposed metal areas using a rust inhibitor primer and paint
as specified in Table 7-4, Materials and Parts. Allow for the appropriate time for primer and paint to cure.
4-23



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business