Custom Search
 
  
 


TB 9-2330-337-14
INSTALLATION (continued)
NOTE
If the through holes are not found on vehicle frame, use the left front bracket
assembly as a template and drill using a 19/32- inch drill bit.
11. Locate two existing holes through vehicle frame as shown.
12. Install left front bracket assembly (9) on vehicle frame with four flat washers (6), two hexagon head
capscrews (8), lockwashers (7), and self-locking nuts (5) , as shown. Torque self-locking nuts to 55-65 lb-ft
(75-81 Nm).
4-7



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business