| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-336-14
INSTALLATION (continued)
52. Using a 19/32- inch drill bit and frame plate (35) as a template, drill nine holes, marked H, through engine
and pump frame, as shown.
53. Using a 19/32- inch drill bit and frame plate (35) as a template, drill two holes, marked G, through hose
trough, as shown.
54. Remove all burrs and sharp edges. Finish all exposed metal areas using a rust inhibitor primer and paint
as specified in Table 7-4, Materials and Parts. Allow for the appropriate time for primer and paint to cure.
4-17
|
||
|
||
