| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-336-14
INSTALLATION (continued)
30. Using a 19/32- inch drill bit and rear shield plate (18) as a template, drill two holes, marked F, through
vehicle and fender (5), as shown.
31. Using a 27/64- inch drill bit and rear shield plate (18) as a template, drill two holes, marked E, through left
rear bracket assembly (5), as shown. Use a 1/2-13 tap to thread through holes E in left rear bracket
assembly (5).
32. Remove all burrs and sharp edges. Finish all exposed metal areas using a rust inhibitor primer and paint
as specified in Table 7-4, Materials and Parts. Allow for the appropriate time for prime and paint to cure.
4-11
|
||
|
||
