| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-336-14
INSTALLATION (continued)
14. Install left support bracket (14) on hose reel cabinet with eight flat washers (8), four hexagon head
capscrews (11), lockwashers (10), and self-locking nuts (9). Hand tighten self- locking nuts.
NOTE
Install small shims 12500845- 1 through -3 as required to ensure the frame plate
is straight and even with the hose reel cabinet.
15. Check the straightness of the frame plate (12) against the hose reel cabinet at door opening. Shim gap
using small shims as required.
16. Install frame plate (12) on hose reel cabinet with eight flat washers (8), four hexagon head capscrews
(16), lockwashers (10), and self-locking nuts (9). Hand tighten self- locking nuts.
NOTE
Install large shims 12500846-1 through -3, as needed, to ensure the frame plate is
straight and even with the hose reel cabinet. Do not shim the area between the
center support bracket and left front bracket assemblies.
17. Check the straightness of the frame plate (12) against the hose reel cabinet and fender of vehicle. Shim
gap using large shims as required.
18. Install frame plate (12) on hose reel cabinet with eight flat washers (8), four hexagon head capscrews
(15), lockwashers (10), and self-locking nuts (9). Hand tighten self- locking nuts.
19. Install frame plate (12) on left front bracket assembly (1) with four flat washers (8), two hexagon head
capscrews (10), lockwashers (10), and self-locking nuts (9). Hand tighten self- locking nuts.
20. Torque support bracket and frame plate hardware to 55-65 lb-ft (75-81 Nm).
4-8
|
||
|
||
