| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-336-14
INSTALLATION (continued)
9. Install left support bracket (14) on frame plate (12) with six flat washers (8), three hexagon head
capscrews (11), lockwashers (10), and self-locking nuts (9). Torque self-locking nuts to 55-65 lb-ft
(75-81 Nm).
10. Clamp support bracket (14) against hose reel cabinet.
CAUTION
When drilling through hole in upper slot of mounting plate , use caution not
to drill through welded angle bracket.
11. Using a 19/32- inch drill bit and support bracket (14) as a template, drill four holes, marked A, through
hose reel cabinet, as shown. Insert pry bar through slotted hole of support bracket to hold in place.
4-6
|
||
|
||
