| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-330-14&P-1
INITIAL INSTALLATION (continued)
NOTE
When installing door assemblies, ensure the gap is even around the
outside of the door before tightening the hardware securely.
39. Install door assembly A (33) on front panel A (18) with twelve flat washers (30), six capscrews
(27), and six self-locking nuts (29). Torque self-locking nuts to 30-35 lb-ft (41-48 Nm).
40. Install door assembly B (36) on front panel B (15) with twelve flat washers (30), six capscrews
(27), and six self-locking nuts (29).
41. Install safety latch (34) on door assembly B (36) and front panel B (15) with four flat washers
(30), two capscrews (35), and two self-locking nuts (29).
42. Torque door assembly B (36) and safety latch (34) self-locking nuts to 30-35 lb-ft (41-48 Nm).
4-18
|
||
|
||
