TB 9-2330-330-14&P-1
VEHICLE PREPARATION (continued)
NOTE
The rear fender mounting bracket does not mount to the crossmember
with hardware.
49. Remove four self-locking nuts (151), four capscrews (150), eight flat washers (149), and two
mounting brackets (136) from crossmembers (148). Discard hardware.
50. Remove three self-locking nuts (157), three J-bolts (152), six flat washers (153), and three
retaining straps (128) from three mounting brackets (136) and fender (129). Discard washers
and nuts.
51. Remove three self-locking nuts (156), three capscrews (154), six flat washers (155), and three
mounting brackets (136) from fender (129). Discard hardware.
3-16