| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-329-14&P-1
REMOVAL/REPLACEMENT (continued)
18. Remove two capscrews (9), two self-locking nuts (2), four flat washers (1), and three shims
(50) from slotted holes of support plate (47) and piping frame assembly (49). Discard nuts.
19. Remove two capscrews (9), two self-locking nuts (2), four flat washers (3), and support plate
(47) from crossmember (48).
20. Remove air reservoir drain cable (45) from slot of rear plate panel A (46).
21. Remove two capscrews (9), two self-locking nuts (2), four flat washers (3), and rear plate
panel A (46) from vehicle frame (44). Discard nuts.
22. Remove four capscrews (9), four self-locking nuts (2), eight flat washers (3), and rear plate
panel A (46) from rear plate panel B (41). Discard nuts.
4-39
|
||
|
||
