INITIAL INSTALLATION (Cont) - TB-9-2330-329-14-P-10080

Custom Search

Back
INITIAL INSTALLATION (Cont)

Up
TB-9-2330-329-14-P-1 Tanker Ballistic Protection System (TBPS/AOA/FTSS) for Semitrailer Tank Fuel 5000-Gallon M967A2P1 Manual

INITIAL INSTALLATION (Cont)

TB 9-2330-329-14&P-1

INITIAL INSTALLATION (continued)

NOTE

Do not fully tighten capscrews or clamping screws until armor is

properly positioned and aligned on piping frame assembly.

59. Position support plate (47) on crossmember (48). Align holes of support plate (47) with existing

holes of crossmember (48) and install with four flat washers (3), two capscrews (9), and two

self-locking nuts (2). Do not fully tighten hardware.

60. Align slotted holes of support plate (47) with existing holes of piping frame assembly (49),

insert three shims (50) between support plate (47) and piping frame assembly (49), and

install with six flat washers (3), three capscrews (9), and three self-locking nuts (2). Do not

fully tighten hardware.

4-22