| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-329-14&P-1
INITIAL INSTALLATION (continued)
51. Install rear panel plate B (41) on piping frame assembly (42) with two flat washers (3),
capscrew (9), and self-locking nut (2).
52. Tighten rear panel plate B (41) and panel bracket (40) hardware. Torque self-locking nuts
to 55-65 lb-ft (75-88 Nm).
53. Install angle brace (14) on support plate (43) with four flat washers (3), two capscrews (9), and
two self-locking nuts (2). Do not tighten hardware.
54. Position support plate (43) on rear panel plate B (41) and install with ten flat washers (3), five
capscrews (9), and five self-locking nuts (2). Torque self-locking nuts
to 55-65 lb-ft (75-88 Nm).
4-20
|
||
|
||
