| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-329-14&P-1
INITIAL INSTALLATION (continued)
NOTE
When installing door assemblies, ensure the gap is even around
the outside of the door before tightening the hardware securely.
40. Install door assembly A (34) on front panel A (21) with twelve flat washers (32), six capscrews
(33), and six self-locking nuts (31). Torque self-locking nuts to 30-35 lb-ft (41-48 Nm).
41. Install door assembly B (37) on front panel B (17) with twelve flat washers (32), six capscrews
(33), and six self-locking nuts (31).
42. Install safety latch (35) on door assembly B (37) and front panel B (17) with four flat washers
(32), two capscrews (36), and two self-locking nuts (31).
43. Torque door assembly B (37) and safety latch (35) self-locking nuts to 30-35 lb-ft (41-48 Nm).
4-17
|
||
|
||
