| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-329-14&P-1
INITIAL INSTALLATION (continued)
NOTE
Ensure front panel B 12502024 and front panel A 12501980 are aligned
flush and even with the engine housing before tightening clamp screws.
32. Align front panel B (17) and front panel A (21) flush with bottom of engine housing. Tighten two
capscrews (19) and jam nuts (18) to secure front panel B (17) on engine housing.
33. Tighten all armor panel hardware. Torque capscrews and self-locking nuts
to 55-65 lb-ft (75-88 Nm).
34. Tighten all front panel C (24) hardware. Torque self-locking nuts to 55-65 lb-ft (75-88 Nm).
35. Extend gap adjustment cover (15) to meet front panel C (24) and tighten gap adjustment cover
hardware. Torque self-locking nuts to 55-65 lb-ft (75-88 Nm).
4-15
|
||
|
||
