TB 9-2330-329-14&P-1
VEHICLE PREPARATION (continued)
23. Remove two nuts (65), two bolts (63), seal (62), split-pipe coupling (64), and pipe (53) from
cross assembly (66).
24. Remove two nuts (67), two bolts (60), seal (61), split-pipe coupling (68), and cross
assembly (66), with pipe (47) attached, from semitrailer.
25. Remove retaining pin (74) and ground rod (72) from ground rod storage tube (73).
NOTE
Vent tube brackets may be attached to fenders using three or four capscrews.
26. Remove six capscrews (69), six self-locking nuts (71), twelve flat washers (70), and two
brackets (60) from semitrailer. Discard hardware.
3-8