TB 9-2330-329-14&P-1
VEHICLE PREPARATION (continued)
12. Remove self-locking nut (28), capscrew (26), two flat washers (29), and retaining strap (13)
from mounting bracket (12) and engine compartment (27). Discard hardware.
13. Remove remaining two self-locking nuts (28), two capscrews (26), four flat washers (29), and
mounting bracket (12) from engine compartment (27). Discard mounting bracket
and hardware.
14. Remove three self-locking nuts (39), three capscrews (36), six flat washers (37), and three
retaining straps (25) from three mounting brackets (23) and fender (38). Discard hardware.
15. Remove four self-locking nuts (35), four capscrews (30), eight flat washers (31), and two
mounting brackets (23) from crossmember (34). Discard hardware.
16. Remove four self-locking nuts (40), four capscrews (33), eight flat washers (32), and two
mounting brackets (23) from fender (38). Discard hardware and mounting brackets.
3-5