Custom Search
 
  
 


TB 9-2330-329-14&P-1
KIT PARTS AND THEIR DISPOSITION (continued)
Table 3-1. FTSS Kit Contents List 57K4865 (continued)
Item
National Stock
Nomenclature
Part Number
CAGE
Qty
No.
Number
BRACKET, TUBE CANISTER,
31902
145
12502004
4
ROADSIDE
146
NUT, SELF-LOCKING
M45913/4-6CG8Z
96906
45
147
NUT, SELF-LOCKING
M45913/4-8CG8Z
96906
17
148
WASHER, FLAT
MS15795-818
80205
34
SCREW, CAP, HEXAGON, HEAD
149
5310-01-310-2353
B1821BH050C175N
80204
17
1/2-16X1.75
BRACKET, TUBE CANISTER,
31902
151
12502003
4
CURBSIDE
VEHICLE PREPARATION
The following procedure removes components to allow access to restricted areas of the fuel tanker
before the FTSS System coating is applied. Once the coating has been applied, dried, and inspected,
some of the components may be reinstalled.
NOTE
Check assembly areas for any items that could interfere with the installation
of the FTSS kit, should any items be in the way, use a Hand Grinder to
remove those items. Finish all exposed metal areas using a rust inhibitor
primer and paint as specified in Table 7-4, Materials and Parts. Allow for
the appropriate time for prime and paint to cure.
1.
Ensure the semitrailer is properly grounded, refer to TM 9-2330-329-14&P.
2.
Remove two self-locking nuts (4), four flat washers (3), two capscrews (1), and hazardous
materials placard bracket (2) as a unit from front of semitrailer. Discard hardware.
3-2



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business