| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-329-14&P-1
CORROSION PREVENTION AND CONTROL (CPC)
1. CPC of Army materiel is a continuing concern. Any corrosion problems with this item should be
reported so that they can be corrected and improvements made to prevent the problem in future
items.
2. While corrosion is typically associated with rusting of metals, it can also include deterioration of
other materials, such as rubber and plastic. Unusual cracking, softening, swelling, or breaking of
these materials may be a corrosion problem.
3. If a corrosion problem is identified, it can be reported using SF 368, Product Quality Deficiency
Report. Use of key words such as "corrosion," "rust," "deterioration," or "cracking" will ensure
that the information is identified as a CPC problem.
4. The form should be submitted to the address specified in DA PAM 750-8, The Army
Maintenance Management System (TAMMS) User's Manual.
DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE
Refer to TM 750-244-6, Procedures for Destruction of Tank-Automotive Equipment to Prevent Enemy
Use, for procedures on destruction of military vehicles.
PREPARATION FOR STORAGE OR SHIPMENT
Refer to TM 38-470, Storage and Maintenance of Army Prepositioned Stock Material, for preservation,
packaging, marking, and preparation for storage or shipment of the M967A2P1 series fuel tanker.
LIST OF ABBREVIATIONS AND ACRONYMS
AKO
Army Knowledge Online
AOA
Add-On-Armor
AVIM
Aviation Intermediate Maintenance
AVUM
Aviation Unit Maintenance
CPC
Corrosion Prevention and Control
DA PAM
Department of the Army Pamphlet
DOT
Department of Transportation
EIR
Equipment Improvement Recommendations
FRP
Field Repair Patch
FTSS
Fuel Tank Self-Sealing
kPa
Kilopascal
psi
Pounds per Square Inch
TAMMS
The Army Maintenance Management System
TB
Technical Bulletin
TBPS
Tanker Ballistic Protection System
TM
Technical Manual
1-2
|
||
|
||
