DRAFT
TB 9-2320-279-12-1
0003
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
HEMF03151
35. Remove electrical cable (32) from stowage and attach to rear electrical connector (33) on wrecker.
36. Route electrical cable (32) over crosstube (7) to electrical connector (34) on the front of the disabled vehicle.
37. Lock disabled vehicle's steering (refer to MTVR operator's manual).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
HEMF02997
38. Set POWER switch (35) to ON position.
39. Set HIGH IDLE switch (36) to CONTINUOUS.
40. Push and release LATCH switch (37). Engine speed will increase to approximately 1500 rpm.
0003-9