b. Cab Armor Installation (Cont'd).
12. INSTALL REAR WINDOW ARMOR
Position bottom rear window bracket on rear wall armor and secure with ten bolts
(B1821BH038C200N), lock washers (MS35338-46), and washers (MS27183-14).
Install sliding armored door on bottom rear window bracket and secure by installing upper
rear window bracket with ten bolts (B1821BH038C200N), lock washers (MS35338-46), and
washers (MS27183-14).
Install four bolts (B1821BH038C200N) and lock washers (MS35338-46) to be used as a
stopper for the sliding door.
Adjust bottom bracket to allow door to lock in fully open and fully closed positions.
13. ADJUST FIT TO ALIGN HOLES
Adjust or shift plates to align seat mount holes in armor floor plate with holes in cab.
Once all hardware can be started, tighten all firewall armor hardware.
17