Quantcast Disassembly of Landing Gear Right Leg Assembly. (Cont) - TM-9-82400185

Custom Search
 
  
 


A-1/4 x 3/4 fillister-hd screw 132266
B-1/4-in. bolt size lockwasher 120380
C-Revel gear cover 8376588
D-Cover ganket 8376589
E-1-in. locknut 451091
F-Operating screw bevel gear 8379855
G-Input bevel gear 8376574
H-Stop washer 8376583
J-Bushing 8379857
K-Bevel gear shaft 8376591
L-1/4 x 7/8 woodruff key 124551
M-1/4 x 1 1/4 straight pin 142521
N-3/8 x 1 1/4 straight pin 142543
P-Crank shaft 8376592
Q-Bushing 8379857
R-13/32-in. dia ball 169112
S-Compression spring 8376590
T-Bevel gear shaft spur gear 8376610
U-Upper roller bearing 703127
V-Crank shaft spur gear 8376611
W-0.812 x 0.250 key 8376593
63-Continued.
and cover gasket (D) to upper leg gear housing. Re-
move cover and gasket. Discard gasket. Remove com-
pression-spring (S) from internal boss in gear hous-
ing
which
mounts
end
of
crank
shaft
(P).
Rotate
crank shaft to expose straight pin which secures crank
shaft spur gear (V) to crank shaft. Using a drift pin,
drive
out
straight
pin
(N).
Slide
crank
shaft
out
of
crank shaft spur gear in gear housing. Ball (R) will
drop  out  of  internal  boss  as  crank  shaft  is  removed.
Lift crank shaft spur gear out of gear housing.
(3)
Rotate
bevel
gear
shaft
(K)
to
expose
two
straight
pins
(M
and
N)
which
secure
bevel
gear
shaft
spur
gear
(T)
to
shaft,
and
shaft
in
housing.
Using
a
drift pin, drive out straight pins. Partially tap bevel.
gear shaft from bevel gear shaft spur gear, stop washer
(H)
and
input
bevel
gear
(G).
Remove
stop
washer
(H)
and
input
bevel
gear
(G)
from
shaft.
Remove
woodruff key (L) from keyway in shaft. Remove bevel
gear shaft spur gear (T) from shaft and remove shaft
from housing.
(4) Remove lock nut (E) which secures operating screw
bevel
gear
(F)
on
operating
screw.
Pull  operating
Remove key
screw bevel gear from operating screw.
(W) from keyway in screw.
(5) Remove cotter pin (P, g. 64) which secures gib plug
(L, fig. 64) in boss of collar at bottom of upper leg
(M, fig. 64). Remove gib plug and gib (K, fig. 64).
TACO 1321B
145



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.