Custom Search
 
  
 


TM 9-2330-380-14&P
4-33. Fan Replacement (M129A4 Only)
This task covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
EquipmentConditions:
General mechanic's tool kit (item 01, Appendix B)
Power source disconnected.
WARNING
Make sure all electrical power is disconnected before performing any maintenance on the electrical
system. Serious injury or death may result if proper precautions are not taken.
a. Removal
1. Loosen grommet (1). Tag and disconnect wires (2) from
fan (3) to capacitor box (4) (para. 4-34).
2. Remove four screws (5), nuts (6), fan (3) and screen (7). If
damaged, discard screen .
b. Installation
6
1. Position screen (7) and fan (3) in place on interior wall of
semitrailer. Secure with four screws (5) and nuts (6).
2. Connect wires (2) from fan (3) to capacitor box (4) (para.
4-34). Tighten grommet (1).
5
3
Follow-on maintenance: None
7
2
1
4



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business