Quantcast Wiring Harnesses

Custom Search
 
  
 


TM 9-2330-380-14&P
4-30. Wiring Harnesses
This task covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
EquipmentConditions:
Power source disconnected.
General mechanic's tool kit (item 01, Appendix B)
Materials/Supplies:
WARNING
Make sure all electrical power is disconnected before performing any maintenance on the electri-
cal system. Serious injury or death may result if proper precautions are not taken.
NOTE
See wiring diagrams on pages 4-8 through 4-66 before routing and connecting wiring harnesses.
a. Removal
1. Disconnect harness from all connectors.
2. Remove nuts (1), washers (2), screws (3) and clamps (4)
securing harness (5) to undercarriage.
3. Remove harness.
b. Installation
1. Position harness, threading through cutouts where
required and secure with screws (3), washers (2), nuts
(1) and clamps (4).
2. Connect harness to all connectors.
3. Make a continuity check of all circuits, using a multimeter.
Follow-on maintenance: None



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.