Quantcast Section II. SERVICE UPON RECEIPT - TM-9-2330-380-14-P0080

Custom Search
 
  
 


TM 9-2330-380-14&P
Section II. SERVICE UPON RECEIPT
Paragraph
Page
Number
ParagraphTitle
Number
General ............................................................................................................................. 4-2
InspectionInstructions ........................................................................................................ 4-2
ServicingInstructions .......................................................................................................... 4-2
4-5. General
When a new, used or reconditioned semitrailer is received, determine whether it has been properly prepared for
service and is capable of performing its mission by performing the inspection instructions in para. 4-6 and the servicing
instructions in para. 4-7.
4-6. Inspection Instructions
a. Refer to DD Form 1397 for procedures on unpacking the XM1063 or M129A4 semitrailer.
b. Remove all straps, plywood, tape, seals, and wrappings.
WARNING
Dry cleaning solvent (P-D-680) is toxic and flammable. Avoid prolonged breathing of vapors.
Avoid skin contact. Use only in a well-ventilated area. Keep away from open flame. Flash
point of solvent is 380oF (50oC).
c. Remove rust preventive compound from coated exterior parts of the XM1063 or M129A4 semitrailer using dry
cleaning solvent and rags (items 3 and 14, Appendix E).
d. Inspect semitrailer for damage incurred during shipment. Also check to see if the equipment has been modified.
e. Check the equipment against the packing list to make sure the shipment is complete. Report any
discrepancies in accordance with instructions in DA PAM 738-750.
4-7. Servicing Instructions
a. Perform all Operator/Crew and Unit preventive maintenance checks and services (PMCS) listed in Tables 3-1
and 4-1. Schedule the quarterly and semiannual PMCS on DD Form 314 (Preventive
Maintenance Schedule and Record).
b. Lubricate all lubrication points as described in Appendix I, regardless of interval.
c. Report any problems on DA Form 2407.
d. Perform a break-in road test of 25 miles (40.23 km) at a maximum speed of 30 mph (48.27 kph).



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.