Quantcast Chapter 3. OPERATOR MAINTENANCE INSTRUCTIONS - TM-9-2330-380-14-P0069

Custom Search
 
  
 


TM 9-2330-380-14&P
OPERATOR MAINTENANCE INSTRUCTIONS
Section I. OPERATOR/CREW TROUBLESHOOTING PROCEDURES
Paragraph
Page
Number
ParagraphTitle
Number
General ............................................................................................................................. 3-1
Explanation Of Columns .................................................................................................. 3-2
TroubleshootingMalfunctionIndex ....................................................................................... 3-2
Operator/CrewTroubleshooting .......................................................................................... 3-3
3-1 General
a. This section provides information for identifying and correcting malfunctions that may develop while
operating the semitrailer.
b. The troubleshooting malfunction index (para. 3-3) lists common malfunctions that may occur and refers you
to Table 3-1 Operator/Crew Troubleshooting, for the appropriate procedures.
c. If you are unsure of the location of an item mentioned in troubleshooting, refer to para. 3-3 or to the
maintenance task in this manual where the item is replaced.
d. Before beginning troubleshooting, read and follow all safety instructions in the warning summary found in the
front of this manual.
e. This section cannot list all the malfunctions that may occur, nor all the tests, inspections or corrective actions.
If a malfunction is not listed or is not corrected by the corrective action listed, notify your supervisor.
When troubleshooting a malfunction:
f.
(1) Locate the malfunction or malfunctions in the troubleshooting malfunction index (para. 3-3) that best
describes the malfunction.
(2) Turn to the page in Table 3-1 where the troubleshooting procedures for that malfunction are described.
Headings at the top of the page show how each troubleshooting procedure is organized;
MALFUNCTION, TEST OR INSPECTION and CORRECTIVE ACTION. The malfunctions, tests
or inspections and corrective actions are indented to line up with the appropriate heading.
(3) Perform each step in the order listed until the malfunction is corrected. DO NOT perform any
maintenance task unless the troubleshooting procedure tells you to do so.



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.