EXPLANATION OF CROSS-REFERENCE INDEXES WORK PACKAGES FORMAT AND COLUMNS
2. Part Number (P/N) Index Work Package. P/Ns in this index are listed in ascending
alphanumeric sequence (vertical arrangement of letter and number combinations which places
the first letter or digit of each group in order A through Z, followed by the numbers 0 through 9
and each following letter or digit in like order).
PART NUMBER Column. Indicates the P/N assigned to the item.
FIG. Column. This column lists the number of the figure where the item is identified/located in the
repair parts list and special tools list work packages.
ITEM Column. The item number is the number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
UOC. The UOC appears in the lower left corner of the Description Column heading. Useable On
Codes are shown as "UOC: ..." in the Description Column (justified left) on the first line under the
applicable item/nomenclature. Uncoded items are applicable to all models. Identification of the
UOCs used in the RPSTL are:
Fabrication Instructions. Bulk materials required to manufacture items are listed in the bulk material
functional group of this RPSTL. Part numbers for bulk materials are also referenced in the
Description Column of the line item entry for the item to be manufactured/fabricated.
Index Numbers. Items which have the word BULK in the figure column will have an index number
shown in the item number column. This index number is a cross-reference between the NSN / P/N
index work packages and the bulk material list in the repair parts list work package.
END OF WORK PACKAGE