Quantcast REMOVAL - TM-9-2330-331-14-P0220

Custom Search
 
  
 


TM 9-2330-331-14&P
0042 00
AIR BRAKE CHAMBERS REPLACEMENT - Continued
REMOVAL
1. Rotate slack adjuster manual adjustment hex counterclockwise until pin becomes loose in slack
adjuster yoke.
2. Loosen jamnut (4). Remove and discard cotter pin (7) from straight pin (5).
3. Remove straight pin (5) from yoke (universal joint, vehicular) (6).
NOTE
Ensure air lines are marked prior to removal.
4. Remove air lines.
5. Remove two locknuts (8), washers (9), and air brake chamber (1). Discard locknuts.
6. Remove elbows (2) and adapters (3) from air brake chamber (1).
7. Measure distance from the face of the air brake chamber to the jamnut (4).
8. Remove yoke (universal joint, vehicular) (6) and jamnut (4) from air brake chamber (1).
3
2
3
2
1
9
8
7
4
6
5
Figure 1. Air Brake Chamber



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.