BRAKE DRUM REPLACEMENT - Continued
1. Rotate slack adjuster manual adjustment hex counterclockwise until pin becomes loose in slack
Wheel studs should only be removed if damaged.
2. Remove brake drum (1) and ten wheel studs (3) from hub (2).
1. Seat brake drum (1) onto hub (2) using ten wheel studs (3) as guides. Do not damage threads.
Step 2 is only required if brakes are caged.
2. Uncage brakes according to WP 0007 00-15.
Figure 1. Brake Drum Removal
Adjust brakes (WP 0038 00-4).
Install tires and wheels (WP 0016 00-3)
Connect semitrailer to prime mover.
Raise landing legs.
Remove/store chocks and ground boards.
Verify proper/safe operation.
END OF WORK PACKAGE