Quantcast INSTALLATION - TM-9-2330-331-14-P0195

Custom Search
 
  
 


TM 9-2330-331-14&P
0035 00
SERVICE BRAKES - S-CAMSHAFT REPLACEMENT - Continued
INSTALLATION
1. Install cam bushing (4) with four screws (6).
2. Install new O-rings (5 and 8), S-camshaft housing, bushing (7), and four screws (9).
3. Lube grease fittings (WP 0022 00-4).
4. Lightly lube S-camshaft lobes with GAA grease. Wipe off excess grease (WP 0022 00-1).
5. Install S-camshaft (1) with new gasket (3), and washer (2).
6. Install washer (10) on S-camshaft.
NOTE
Step 7 is only required if brakes are caged.
7. Uncage brakes according to WP 0007 00-15.
FOLLOW-ON TASKS
Install brake shoes (WP 0034 00-3).
Install brake drum (WP 0036 00-2).
Install slack adjuster (WP 0038 00-3).
Install hub (WP 0037 00-2).
Install tire and wheel (WP 0016 00-3).
Remove jack stands from axles.
Connect semitrailer to prime mover.
Adjust brakes (WP 0038 00-4).
Verify proper/safe operation.
END OF WORK PACKAGE
0035 00-3/4 Blank



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.