Quantcast ABS WARNING LIGHT WIRING HARNESS REMOVAL

Custom Search
 
  
 


TM 9-2330-331-14&P
0033 00
ABS WARNING LIGHT WIRING HARNESS REPLACEMENT
ABS WARNING LIGHT WIRING HARNESS REMOVAL
1. Remove ABS warning light per WP 0031 00-2.
2. Disconnect ABS warning light wiring harness (1) from main wiring harness (2).
3. Remove ABS warning light wiring harness (1) from frame.
4. Remove and discard damaged grommets as needed.
2
1
Figure 9. ABS Warning Light Wiring Harness
NOTE
See charts in WP 0025 00-3 for details on wiring diagram.
ABS WARNING LIGHT WIRING HARNESS INSTALLATION
1. Install new grommets as needed.
2. Install ABS warning light wiring harness (1) on frame.
NOTE
Apply dielectric grease to each plug before connecting to other
cables and harnesses.
3. Connect ABS warning light wiring harness (1) to main wiring harness (2).
4. Install ABS warning light per WP 0031 00-2.
5. Connect to prime mover and check all lights for correct operation.
END OF WORK PACKAGE



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.