Quantcast REAR CLEARANCE LIGHT WIRING HARNESS REMOVAL

Custom Search
 
  
 


TM 9-2330-331-14&P
0033 00
REAR CLEARANCE LIGHT WIRING HARNESS REPLACEMENT
REAR CLEARANCE LIGHT WIRING HARNESS REMOVAL
1. Remove rear clearance lights per WP 0030 00-2.
2. Disconnect rear clearance light wiring harness (1) from rear main wiring harness (2).
3. Remove rear clearance light wiring harness (1) from frame.
4. Remove and discard damaged grommets as needed.
1
2
Figure 7. Rear Clearance Light Wiring Harness
NOTE
See charts in WP 0025 00-3 for details on wiring diagram.
REAR CLEARANCE LIGHT WIRING HARNESS INSTALLATION
1. Install new grommets as needed.
2. Install rear clearance light wiring harness (1) to frame.
NOTE
Apply dielectric grease to each plug before connecting to other
cables and harnesses.
3. Connect rear clearance light wiring harness (1) to rear main wiring harness (2).
4. Install rear clearance lights per WP 0030 00-3.
5. Connect to prime mover and check all lights for correct operation.
0033 00-8



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.