Quantcast REAR WIRING HARNESS REMOVAL

Custom Search
 
  
 


TM 9-2330-331-14&P
0033 00
REAR WIRING HARNESS REPLACEMENT
REAR WIRING HARNESS REMOVAL
1. Disconnect rear wiring harness (2) from main wiring harness (5) and tail lights harnesses (1).
2. Disconnect rear wiring harness (2) from blackout lights harness (3) and rear clearance lights harness (4).
3. Remove rear wiring harness (2) from frame.
4. Remove and discard damaged grommets as needed.
1
5
2
3
4
1
Figure 3. Rear Wiring Harness
NOTE
See charts in WP 0025 00-3 for details on wiring diagram.
REAR WIRING HARNESS INSTALLATION
1. Install new grommets as needed.
2. Install rear wiring harness (2) on frame.
NOTE
Apply dielectric grease to each plug before connecting to other
cables and harnesses.
3. Connect rear wiring harness (2) to blackout lights harness (3) and tail lights harnesses (1).
4. Connect rear wiring harness (2) to main wiring harness (5) and rear clearance lights harness (4).
5. Connect to prime mover and check all lights for correct operation.
0033 00-3



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.