Quantcast Table 3. Operator/Crew PMCS (Continued) - TM-9-2330-331-14-P0098

Custom Search
 
  
 


TM 9-2330-331-14&P
0015 00
Table 3. Operator/Crew PMCS - Continued
ITEM TO BE
ITEM
MAN­
EQUIPMENT
CHECKED OR
PROCEDURE
NO.  INTERVAL HOUR
NOT READY/
SERVICED
AVAILABLE IF:
Kingpin
Kingpin is damaged
2
a. Visually inspect kingpin for obvious
.25
Before
or shows obvious
damage and wear. Make sure kingpin
wear.
and coupler plate are greased per
WP 0022 00 if required for prime mover.
Coupler plate is
b. Visually inspect coupler plate for
.25
bowed or welds
obvious damage, bowing, and cracked
are cracked.
welds.
Coupler plate drain
c. Check to make sure coupler plate
.25
holes are plugged.
drain holes are not plugged.
Nuts and bolts are
d. Check for loose or missing nuts and
.15
loose or missing.
bolts.
Voltage
3
Visually check for damage.
.10
Before
damaged.
Gladhands
Inspect gladhands for damage. Gladhands Gladhands are
4
.10
Before
damaged, seals
are missing, worn/cracked seals, and
worn/cracked or
missing hardware.
missing, or missing
hardware.
NOTE
Check for corroded or loose
plug-in connectors. Make sure
there is no debris between plug
and connector and then make
sure
that plug-in is seated.
Mission requirements,
urgency, safety, and common
sense should be considered in
determining NMC status of the
semitrailer.



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.