Table 2. Organizational Troubleshooting - Continued
TEST OR INSPECTION
ABS WARNING LIGHT
1. ABS WARNING LIGHT
COMES ON AND STAYS
ON AT OPERATING
The ABS light identifies the center
SPEEDS (ABOVE 4
and rear axles issues.
MPH [6 KM/H])
Frequent ABS issues may be the
result of wheel bearings (rollers) out of
1. Turn prime mover (refer to applicable
prime mover TM) ignition switch ON.
2. Count to three and turn OFF ignition
switch. Immediately turn switch ON again.
3. The ABS warning indicator light will come
on and then off.
Record ABS blink code and
4. The ABS blink code will then be displayed
refer to ABS diagnostics per