SIDE RACK PANEL AND STAKE INSTALLATION AND REMOVAL
Side rack panels and stake installation and removal is difficult. Two
personnel are required to safely perform this task. Damage to equipment
or injury to personnel may occur if warning is not followed.
Not all trailers are equipped with side rack kits.
Start side rack panel installation from front and work to rear.
Side rack panels are different sizes. Ensure that they are installed in
Side racks should be installed with the notched side down, as shown in
Figures 7 and 8, when cargo tie downs are used. Side racks should be
installed with the notched side up during all other operations.
1. Install first side rack panel (1) into slot in bulkhead (4).
2. Install slot of stake (2) on side rack panel (1) and slide stake into slot (3).
3. Install remaining side racks (5).
Figure 8. Side Panels
Figure 7. Side Rack Rail