Custom Search
 
  
 


TM 9-2330-330-14&P
ALTERNATOR MAINTENANCE--Continued
0161 00
10.
Install four thru-bolts (1) and tighten evenly to 50 to 60 lb-in (5.6 to 6.8 Nm).
11.
Install new brush assembly (12) with two washers (14) and screws (13).
12.
Install new gasket (10) to regulator (9).
13.
Connect yellow and green wires (11) from regulator (9) to brush assembly (12) and rear housing
(4).
14.
Install regulator (9) to rear housing (4) with four washers (3) and screws (2).
15.
Install two washers (6), leads (7), washers (8), and nuts (5) to rear housing (4).
0161 00-9



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business