ENGINE AND PUMP CABINET FRAME REPLACEMENT--Continued
Remove four self-locking nuts (84), eight washers (85), and four bolts (86) from inside vertical
support (87). Discard self-locking nuts.
Remove two self-locking nuts (88), four washers (89), two bolts (90), and front inside vertical
support (87) from semitrailer tank rib (83). Discard self-locking nuts.
Using a forklift, lower engine frame.
Separate engine and pump from frame.
26. Remove damaged components from engine frame and discard self-locking nuts.
Engine frame is bolted together. Loosely assemble frame
Components on a flat surface. Tighten fasteners on cross