| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-330-14&P
ENGINE AND PUMP CABINET FRAME REPLACEMENT--Continued
0158 00
2.
Remove four self-locking nuts (12), eight washers (11), and four bolts (10) from side and bottom of
bottom loading support bracket (9). Discard self-locking nuts.
3.
Remove two bolts (5), nuts (4), seal (7), and split coupling (6) at inlet T (8). Discard seal.
4.
Remove two bolts (15), nuts (16), seal (13), and split coupling (14) at top of centrifugal pump (17).
Discard seal.
NOTE
Close all valves and drain fuel from centrifugal pump
using plug at bottom of pump.
0158 00-2
|
||
|
||
