Quantcast ENGINE AND PUMP CABINET FRAME REPLACEMENT - TM-9-2330-330-14-P0691

Custom Search
 
  
 


TM 9-2330-330-14&P
ENGINE AND PUMP CABINET FRAME REPLACEMENT
THIS WP COVERS:
Removal, Installation, Follow-On Tasks
INITIAL SETUP:
Maintenance Level
Tools and Special Tools
Direct and General Support
Tool kit, general mechanic's (item 4, WP 0171 00)
Jack stands (item 3, WP 0171 00)
Materials/Parts
Seals (2) (item 129, WP 0175 00)
Equipment Conditions
Self-locking nuts (2) (item 23, WP 0175 00)
Semitrailer disconnected from prime mover (refer
Self-locking nuts (4) (item 70, WP 0175 00)
Self-locking nuts (4) (item 87, WP 0175 00)
Semitrailer grounded (refer to WP 0007 00)
Self-locking nuts (2) (item 88, WP 0175 00)
Semitrailer fuel tank drained (refer to WP 0007 00)
Self-locking nuts (8) (item 89, WP 0175 00)
Batteries removed (refer to WP 0055 00)
Self-locking nuts (41) (item 92, WP 0175 00)
Fuel lines disconnected (refer to WP 0109 00)
Fuel tank removed (refer to WP 0108 00)
Two hose tubes loosened at engine cabinet (refer
Air cleaner and hose removed (refer
Alternator removed (refer to WP 0116 00)
Muffler plate and muffler removed (refer
Optic socket box removed (refer to WP 0050 00)
Static reel removed (refer to WP 0087 00)
Brake interlock valve removed (refer
REMOVAL
1.
Remove two self-locking nuts (1) and washers (2) from U-bolt (3). Discard self-locking nuts.
NOTE
Secure inlet valve to filter separator.
0158 00-1



 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.