| Tweet |
Custom Search
|
|
|
||
 TM 9-2330-330-14&P
ENGINE OIL FILTER HEAD REPLACEMENT--Continued
0145 00
3.
Remove two nuts (15 and 14), washers (16 and 13), oil filter head (17), gasket (10), plate (9), and
gasket (8) from engine (7). Discard gaskets.
4.
Remove two fittings (3) and gaskets (6) from plate (9). Discard gaskets.
5.
Remove two fittings (4 and 11) and seal (12) from oil filter head (17). Discard seal.
INSTALLATION
NOTE
Apply thread sealing compound to threads of fittings.
1.
Install new seal (12) and two fittings (4 and 11) to oil filter head (17).
2.
Install two new gaskets (6) and fittings (3) to plate (9).
3.
Install new gasket (8), plate (9), new gasket (10), oil filter head (17), washers (16 and 13), and
nuts (15 and 14) to engine (7).
4.
Connect oil pressure line (5) to fitting (4).
5.
Connect return line (2) and oil cooler supply line (1) to fittings (3).
FOLLOW-ON TASKS
1.
Install oil pressure switch (WP 0104 00).
2.
Install oil filter (WP 0104 00).
3.
Reconnect negative battery terminal (WP 0007 00).
4.
Disconnect semitrailer grounding cables (WP 0007 00).
END OF TASK
0145 00-2
|
||
|
||
