GENERAL MAINTENANCE INSTRUCTIONS--Continued
To prevent corrosion, apply a light coat of lubricating oil to metal parts after they are cleaned but before
they are assembled. Lubricate components and systems in accordance with the instructions in PMCS
and WP 0044 00.
Torque values given in maintenance procedures apply to un-lubricated threads. Follow the torque values
given in the maintenance procedures. If no torque value is given, refer to WP 0176 00.
Compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in a well-ventilated
area. If compound gets on skin or clothing, wash immediately
with soap and water.
For proper installation of a decal, note its location before removing.
Use cleaning compound to loosen damaged decal, and remove the decal from the surface. Discard
the decal. Clean any decal residue from the surface with a cleaning compound. Wipe the surface with
a clean rag.