G VALVE MAINTENANCE--Continued
Remove two screws (9) and ratchet plate (8).
Remove two retaining pins (5) from top side of valve (4).
Remove stems (7 and 6) and disc (10) from valve (4).
CLEANING AND INSPECTION
Solvents can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death,
keep away from open fire and use in a well ventilated area.
If solvent gets on skin or clothing, wash immediately with
soap and water.
Clean all metal parts with cleaning compound. Check for any obvious damage such as cracks in parts.
Replace any damaged parts.
Assemble disc (10) to valve (4) with stems (7 and 6).
Insert smooth ends of two retaining pins (5) into valve (4).
Assemble ratchet plate (8) to valve (4) with two screws (9).